Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The TP81 connects to banana jack leads. Banana jack accepts all DMM and banana jack leads. Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead. For use with test leads with 4mm banana plugs. Tested to 60V DC.
Kendall Q-trace Gold 5500 Resting Ecg Tab 5400 Q-trace - Model 31433538 - Case of 1000
Kendall's medium size with most aggressive tack for maximum adhesion. Latex-free; compatible with all machines. 10 tabs per card, 100 tabs per pouch, 20 pouches (2000 tabs) per case. Priced by the case.
The Oakton 35462-10 EcoTestr TDS Low is a handheld, waterproof, and dustproof pocket meter that measures TDS and floats, if dropped in liquids. A portable pocket meter is commonly used to measure the TDS of substance in aquaculture, aquariums, fish ponds, food processing, swimming pools and in environmental treatment. This meter has ATC for accurate readings in fluctuating temperatures, and push-button calibration for a wide range of results. It features a transparent, protective cap to reduce contamination and protect the sensor. The cap keeps the sensor moist when stored upright, and can be used as a container for sensor-conditioning, or on-site calibration. The meter’s waterproof and dustproof housing has IP67-rating for protection against solid objects or liquids. Its stainless steel sensor tip is both durable and chemical resistant. The meter has a large, upright, single-line LCD screen for ease of viewing, a hold function which freezes readings for recording, and an auto shut-off to extend the life of the batteries. It has a click-lock battery cover for battery access to replace batteries without tools. The 35462-10 pocket meter comes with an integral stainless steel sensor, has ATC from 0 to 50 degrees C (32 to 122 degrees F), and operating temperature of 0 to 50 degrees C (32 to 122 degrees F). TDS factor is adjustable 0.4 to 1.0. TDS range is 0 to 1990 ppm, resolution 10 ppm, accuracy + or - 1% full-scale. Its dimensions are 1.25 (l) x 1.5 (w) x 6.5 (h) inches (3.2 x 3.8 x 16.8 cm) and it weighs 3.25 ounces. The testr works with four 1.5 V alkaline batteries (not included) for up to 500 hours of continuous use (Eveready A76 or LR44 replacements). TDS such as salts and minerals contribute to the conductivity of a solution. A TDS meter measures conductivity of a substance and converts it to a TDS reading. TDS readings are commonly used by researchers, manufacturers, and hobbyists in aquaculture, agriculture, hydroponics and water-testing and for scientific applications. Oakton Instruments manufactures an...
The Scilogex MicroPette adjustable single-channel pipettor has a manual volume control, an integral tip ejector, and is calibrated to ISO 8655. This adjustable single-channel micropipette has a manual volume control and is used for transporting a measured volume of liquid. The volume display is located on the side of the pipette for visibility. The plunger requires low operating force to aspirate and dispense liquid, reducing user fatigue and thumb muscle activity, and the pipette has an integral tip ejector for access into narrow tubes. This pipette is calibrated to the International Organization for Standardization (ISO) 8655 standards for precision and accuracy, and it comes with a performance certificate. It can be disassembled for in-house cleaning, calibration, or repair, and it comes with a calibration tool. It has an autoclavable nose cone to ensure sterility and avoid cross-contamination. This pipette is compatible with standard pipette tips. Single-channel pipettes are typically used in biotechnology research, microbiology, and chemistry applications to aspirate, transport, and dispense a small, measured volume of liquid.Pipettes are laboratory tools for collecting, transporting, and dispensing a small amount of liquid. Sometimes called pipets, pipettors, or chemical droppers, a pipette is composed of a tube that collects the measured substance and a mechanism to aspirate and dispense the substance. Some pipettes can measure a fixed volume of liquid, others are graduated to show the volume, while others can be set to measure a volume within a range. Pipettes can aspirate and dispense liquid manually, electronically, or with a pipette filler that can be motorized. Pipettes are available in a variety of sizes and designs, offer ergonomic features for often-repeated functions, can be autoclavable for reuse, or disposable. The type of pipette used is determined by laboratory applications. Pipettes are typically used in medicine, biology, chemistry, and biotechnology for liquid handling, sampling, testing, ...
The Case Prep Xpress is the only "All-Inclusive-InchSystem offering all the most popular case prep accessories driven by a high torque gear motor. The dump pan provides easy clean up of brass shavings. The best part is that all accessories are included from the start, no need to have to separately purchase expensive additional accessories. Also includes Primer Pocket Reamers and Cleaners Large and Small, Case Neck Brushes and Lube, Removable Dump Pan and Clean-up Brush